Tech News & Reviews

Home

How To Perform A Used Car Inspection

Posted by on 3:09 pm in Uncategorized | Comments Off on How To Perform A Used Car Inspection

Do you want to perform a used car inspection? Following these 5 steps will help you ensure you don’t buy a car with a laundry list of hidden problems. If you’re thinking about buying a used car, an important step in process is thoroughly inspecting the vehicle before you buy it. This can save you a lot of headaches (and money) down the road. Companies like damageid.com can help! Following these five steps can help you learn what to look for when performing a used car inspection.

  • Check the condition of the body

The first thing to do in a used car inspection is to examine each body panel, as well as the roof. Make note of any rust spots, dents, and scratches. Look closely at the gaps between the panels (e.g. between the fenders and the doors). If the gaps are uneven, this usually means they were assembled poorly in the factory, or the vehicle was poorly repaired. Also, ensure the colour and finish of the paint are the same on each panel. Next, using a flashlight, take a look inside of the wheel wells for rust. Lastly, open and close all of the doors, as well as the hood and trunk. Inspect all rubber seals around the doors and windows for rot or tearing.

  • Take a look at the glass

Walk around the vehicle and take a careful look at all the glass to make sure there are no cracks or large, cratered areas. Small chips are nothing to be too worried about, but you may want to use them as a bargaining chip when discussing the final price. Cracks, on the other hand, will only get worse and can require an expensive repair later.

  • On even ground, check out the suspension

Another essential thing to check in a used car inspection is the suspension. Stand back from the car and see if it’s slumping or sagging anywhere; what you want it to see that it’s standing level. Push down on each corner of the car. If the shock absorbers are in good condition, the car should rebound only once. If the car continues moving up and down, there’s something wrong. Tug on the top of the front tires. Feel for any movement and listen for and clicking sounds. If you feel or hear anything, it could mean a suspension joint or wheel bearing is broken.

  • Never buy a car with frame damage

One of the most important points to check for in a used car inspection is frame damage. Open the hood and check the saddle (this is the part connecting the front fenders and holding the top of the radiator). This should be bolted into place on either side and never welded. The bolt heads inside the hood, at the top of the fenders, should not have any scratch marks, which can indicate replacement or realignment after a crash. Lastly, check for welds inside of the door jambs.

  • Are the lights and lenses in good condition?

Ideally, bring a friend for the used car inspection so that he/she can confirm that all of the lights are working. Be sure to check all lights on the vehicle: lo-beams, high-beams, turn signals, fog lights, brake lights, 3rd brake light, and reverse light. Additionally, ensure that all lenses and reflectors are not damaged, fogged with moisture, or missing altogether.

  • Tires tell a story of their own

Surprisingly, a lot of information about a car can be gleaned from the tires alone. Anytime you perform a used car inspection, be sure to look closely at tire wear. Often times, a car with less than 20,000 miles on the odometer will still have the original tires installed. If the car has brand new tires and very low-mileage on the clock, this is a good indicator of odometer rollback. Also, all four tires should be the same, as having different tires installed could be a sign that they were replaced.

The wear on the tread should be even across the width of the tire, on both sides of the car.

Why You Need Product Development

Posted by on 9:02 am in Uncategorized | Comments Off on Why You Need Product Development

Product development is simple in concept. It is the:

  • Conversion of market need to a reality-based solution
  • Creating the tangible from the intangible
  • Creation of new wealth

The success of product development efforts typically require considerable resources and the opportunity for lackluster results or outright failure are far higher than anyone will admit. Because of this high risk of failure, it is important to know why product development is important to companies and society.

Why Product Development is Important

product engineering services, is the life-blood of companies and societies. The product could be a physical product such as an automobile, smartphone, or coffee maker. It could also be services such as new IT solution, new manufacturing process, or a new real estate marketing concept.

All successful product development actions provide the following:

  1. New value for customers
  2. Improved society
  3. Continued existence of the company

New Value for Customers

The first and most important reason for any new development is to provide new value to the customer. Without this, there is no reason for them to trade their money for the new device. However, if the product or service offers overwhelming value, then customers will flock to it.

This new and increasing value is what keeps companies growing. If there is no new value to offer customers, the firm wilts and eventually dies. If the value offered is not increasing, then the company is losing ground in the market as its competitors increase their value in the market.

Improved Society

Many new products are simply an incremental improvement over the previous version with only some new features or slight faster performance. These products may sustain the company by offering enough new value to generate additional revenue, but they are hardly a boon to society.

There are certain instances where new products will improve society beyond just the immediate gratification of the consumer. Example of these are innovative new drugs to treat debilitating diseases and automotive safety devices that save hundreds of lives per year. Neither of these may offer the consumer swift satisfaction, but they save lives and therefore improve society.

Continued Existence and Growth of the Company

New products and services are the lifeblood of any company. Without them, the firm withers on the vine and either dies or is absorbed by another firm. Society is well-served by the continuance of these companies from the employment of the individuals who work there (who are also consumers), and the support for society at-large in the form of taxation and charitable giving.

Companies (and civilizations) have little choice but grow and improve if they want to move from survival to thriving. The new products and services created and provided by companies of all sizes provide the mechanism for this growth and improvement. What are you and your firm doing to improve?

What You Need To Know About Insurance Write-Offs

Posted by on 8:48 am in Uncategorized | Comments Off on What You Need To Know About Insurance Write-Offs

There are many different types of car insurance write-off – including some vehicles that can be repaired and put back on the road and some that must be destroyed and never used again.

A Category D insurance write-off falls into the former class: it can legally return to the road, so long as it complies with specific rules governing the various stages of its return to use on the public highway. Firstly though, what causes a Cat D write-off? Quite often, nothing more than light damage. It generally means the vehicle has been lightly damaged but the financial cost of repairing the car outweighs its market value. In short, it is not economical to repair – remember, car insurance companies look at the total cost of repair here, including hire cars, expensive-to-source parts for particular models and so on. Cat D status can sometimes be for very minor damage, if the rest of the repair process is deemed to be more than the car is worth.

This does not mean it can’t be put back on the road, however. Here’s what’s involved in using a Category D insurance write-off on the road. Using a Vehicle Damage App can take a lot of the pressure out of your hands, and thus give you peace of mind after an accident. Once a vehicle is written off and the insurance claim has been paid to the owner, the car insurance company then legally owns the vehicle. Following this, insurers often sell these cars on to garages and motor factors that have the means to repair any damage at a reduced cost. This makes it financially viable for these businesses to repair the car to a roadworthy condition and sell it on, with the insurance company also recouping some of its costs.

If your car has been written off as a Category D case, the Driver and Vehicle Licensing Agency (DVLA) and the Driver and Vehicle Standards Agency (DVSA) will not be informed of the situation, and the car will not be subject to a Vehicle Information Check. The damage is deemed light enough that the car can be repaired and put back on the road following the work. Of course, the car can also be sold through a licensed salvage yard as a damaged car, or broken for spare parts. If the Cat D car is repaired, we do highly recommend that you get a professional mechanic or vehicle engineer to assess the quality of the work and ensure it has been carried out to a high standard. This way, the repaired car will be as safe as possible. It’s important to remember a Cat D car will have been written off only because it is uneconomical to fix, not because any potential damage was so great it could not be driven again. As a result, no test is needed to validate the work, as a reputable garage should deliver the car to a roadworthy standard – if not, subsequent MOT tests should pick up any defects or faulty repairs anyway.

It’s also worth bearing in mind that while a Category D car for sale might be much cheaper than the market value – even if it is in perfect shape with the repairs being carried out to a high standard – when it comes to reselling the vehicle, it won’t be worth as much. Traders have to declare if a car has been written off as part of a sale, but private individuals do not. To help make sure you don’t get caught out paying over the odds, a car data check will unearth if a car has been written off and into what category it was placed – and can be done for just a few pounds. While a cat D write-off might seem cheap, don’t forget some insurers might refuse to offer you cover on a written off vehicle, too, no matter how light the damage was. If you are thinking about buying a cat D vehicle, be sure to check with your car insurance company whether they cover Category D cars.

What You Need To Know Before Buying A Copier

Posted by on 2:01 pm in Uncategorized | Comments Off on What You Need To Know Before Buying A Copier

Although ubiquitous in companies around the world, photocopiers are not one and the same. They may fulfill more or less the same task, yet it is important to assess your needs and get proper information to find a model which will match your expectations and at the same time be simple enough to operate. Besides, when you intend to buy a photocopier from blackbox-solutions.co.uk, it’s also crucial to consider other options such as renting or leasing, to make sure you get the best service at the right price. Most modern photocopiers are nowadays preferably referred to as multi-function printers (MFPs), as they’re able to carry out a wide range of tasks. There are so many different levels of sophistication that taking certain key notions into account is vital to improve your business efficiency when you buy a photocopier.

Ink-jet or laser?

Choosing laser or ink-jet technology depends on your volume requirements. When the price per page is an important consideration, laser machines are at the high end of the price range but are still the optimal option as they are well-adapted to large volumes of copies. When low volume colour documents are required, ink-jet MFPs are the best choice, even if the ink they use is more expensive than toner for laser printers.

Print quality and speed

Speed is generally the most important feature for many businesses. Typically, mid-range machines will provide speeds of between 25 and 50 pages per minute for A4 paper. For companies which need mostly black and white copies, some models are faster in that mode than in colour. Print quality, or resolution, is also an important issue. Most machines offer resolution in the 600-1200 dpi range, which is perfect for internal use or simple flyers and user manuals. For high quality brochures and marketing material, you may need to buy a photocopier able to reach 2400

dpi.

Ergonomics

Manufacturers have taken steps to make their products as user-friendly as possible, and even offer on-site training sessions and hotlines. Network capabilities are essential in most modern offices, to integrate your MFP in the company’s infrastructure. Paper capacity must be carefully considered when you buy a photocopier. Needing to refill the paper tray too often may have an adverse effect on your workflow. High-capacity or multiple paper trays for different paper weights or types will ensure your printer is always ready. Likewise, a variety of finishing tools such as staplers or document folders.

Price

Assessing your needs to pinpoint your budget is of paramount importance, as prices range from £100 to more than £17,000. However, there’s more than just the capital cost to consider, as on the long run the price per page, depending on your printing volume, will represent most of your expenses.

According to your needs and the volume of documents you need to process, permanent purchase may not be the best option. Second hand machines or buying online may also be interesting ways to save money.

Buying a photocopier online

When you want to buy a photocopier, going online is always a good idea, to compare prices, understand the various models’ specificities and benefit from cheaper prices thanks to cheaper overheads. You’ll easily find retailers specializing in monochrome, multifunction or colour photocopiers for instance. You will also be able to negotiate good service rates.

Renting and leasing

Lease purchase or rental will allow you to spread the cost of your photocopier from blackbox-solutions.co.uk over several monthly fees, while guaranteeing your peace of mind as servicing and maintenance are often included in rental or lease contracts. That way, you’ll pay the best price for all your copying needs.

What Kind Of Office Printer Should You Go For?

Posted by on 1:54 pm in Uncategorized | Comments Off on What Kind Of Office Printer Should You Go For?

Most of us use wireless printers from blackbox-solutions.co.uk at home. Why worry about connecting your computer when you can print from anywhere? However, wired connections are typically faster, more reliable and far more secure, all of which are important in business environments, where printers are used more often and by more people at once. Wireless setups, on the other hand, are more flexible, along with being less expensive to deploy.

They are also compatible with mobile devices such as smartphones and tablets. In our increasingly mobile world, many businesses —particularly large enterprises —are choosing to install

applications that allow mobile printing either by connecting the device to the printer or using a Wi-Fi or Bluetooth connection. This is often referred to as cloud printing or mobile printing. Not all printers are compatible with this emerging technology, but it’s something to consider if you have a highly mobile-reliant workforce. Some office printers are also compatible with mobile-printing technologies such as Apple AirPrint, HP ePrint and Google Cloud Print, but that’s something you’ll need to verify.

If you’re solely printing simple business documents in plain text —spreadsheets, memos and letters —monochrome is probably fine. If you need to print graphics, custom logos or documents with charts and other visuals, you’ll want to go with a color printer. Monochrome printers still sell surprisingly well because they cut ongoing costs, but keep in mind that you’re likely stuck with the printer you choose for many years. If you need the ability to print color in the future, you’ll have to find another source.

One of the first things to consider when it comes to features is whether you need a single-function or multi-function printer (MFP). Just as it sounds, single-function printers do one thing: print documents. MFPs are capable of many other tasks, including scanning, copying, emailing and converting documents. Different models combine different features. MFPs are cost-effective because you avoid having to purchase multiple machines, and they take up less space. They help streamline document management and business workflow because you can fax, scan and email documents all from the same machine. However, they’re more expensive. And if one person is using the machine to print, for example, another employee will have to wait to send a fax, make a copy, etc.

Next, consider printing speed and volume, which have a significant impact on price. Generally, print speeds of less than 20 pages per minute (ppm) are too slow for office environments; speeds of 20 ppm to 40 ppm will suffice for most offices; and speeds above 40 ppm are ideal for high-volume use. Some of the most sophisticated machines reach 100 ppm, although this is far more than most small businesses need. Print volume can range from basic models that hold just 100 sheets in the tray and 250 in the cassette to MFPs that hold 500 sheets in the tray and 2,000 or more in two or more cassettes.

Advantages of Multifunctional Printers

Posted by on 1:32 pm in Uncategorized | Comments Off on Advantages of Multifunctional Printers

Most printer manufacturers offer multifunctional models from blackbox-solutions.co.uk that provide the capabilities of multiple machines in a single unit. These devices often include print, scan, copy and fax capabilities in the form of one all-inclusive machine. Originally marketed for home and small business users, many manufacturers now offer larger and more robust models for medium to large business use. Understanding the advantages and disadvantages of a multifunction printer helps you make an informed decision when purchasing new equipment.

Convenience

A multifunction printer like the ones from blackbox-solutions.co.uk offers the convenience of additional features you may not have purchased otherwise. For example, if you normally do not send or receive many fax messages, you may not have invested in a separate fax machine. However, a multifunctional printer that includes fax capabilities allows you to send or receive the occasional fax without an added expense. In addition, the ability to scan an image and then print that image using the same machine offers another level of convenience by saving you the time of walking to two separate devices.

Space Savings

Perhaps one of the greatest advantages of a multifunctional printer includes the space savings offered by the device. Rather than having to find space for a printer, a copier, a fax machine and a

scanner, you can have the same functionality in a single machine. This space savings may benefit those trying to make the most of their home office space or those working with significant space constraints.

Cost Savings

Another advantage of a multifunctional printer includes the cost savings of purchasing one device that performs multiple functions. Although the purchase price for an all-in-one printer may exceed that of a traditional printer, the overall cost typically remains less than purchasing multiple machines. Therefore, you can benefit from increased functionality without paying for each feature. In addition to the savings associated with the original purchase price, maintaining one device costs less than maintaining multiple devices.

Power Savings

Multifunction printers typically require one cord to power the entire device. Not only does this reduce cable congestion, it lowers the electricity required to run the device. This power savings also leads to increased cost savings.

Disadvantages

The biggest disadvantage of a multifunctional device becomes apparent when a problem occurs. Due to the multifunctional nature of the device, a problem with the printer may cause all features to fail. For example, a problem with an ink or toner cartridge may prevent you from printing, copying and receiving faxes. Another disadvantage of a multifunctional printer includes the potential lack of quality or performance when compared to single function devices. For example, the fax machine on a multifunctional device may not offer the same features as those offered by a standalone fax machine.

The Advantages & Disadvantages of Leasing A Commercial Printer

Posted by on 11:02 am in Uncategorized | Comments Off on The Advantages & Disadvantages of Leasing A Commercial Printer

Purchasing or leasing an office printer has it pros and cons. In today’s commercial printing market, most machines also include commercial copiers with blackbox-solutions.co.uk and scanning features. In order to know which direction is appropriate, looking at the variables of each will help you decide which option is best for your business. After you choose the appropriate course of action, it is recommended the contract includes maintenance and toner services.

Leasing a commercial printer with blackbox-solutions.co.uk can be done at a low monthly cost. Also, there is the option to replace the printer with new equipment after a certain amount of time. In addition to having no ownership, other cons are an extended lease period and limited customization options. Owners of commercial printers get to have instant ownership and are not locked in for an extended period of time. Some undesirable drawbacks to owning a commercial printer include the high cost of investment and rapid pace at which the equipment becomes outdated. Next, ask yourself the following questions about whether purchasing or leasing is best. Has your company been in business for a long time? New businesses are often subject to a strict credit approval process. Any business that has been established for less than three years, will most likely need to provide a personal guarantee to be approved for a lease. If the above information is applicable, consider purchasing a refurbished printer at an affordable cost. Once your business is more established, you can always upgrade your equipment and lease a top-of-the-line printer.

What are your printing requirements? If printing at a high volume isn’t necessary, then you may benefit from purchasing a low-cost basic office printer. Commercial printers are built to last a long time. Considering commercial printer lease terms are three to four years, businesses with low-volume printing needs often purchase a printer that will last a good six or seven years. On the contrary, businesses that rely on regular printing should lease a machine and upgrade at the end of the lease. An office that relies on high-volume printing to stay in business, should lease a commercial office printer.

Do you know how much you want to invest in a printer? Large commercial printers are often very expensive. An office with a limited budget will want to lease a printer or copier service. Most businesses don’t need to spend more than a few hundred dollars a month, to lease a printer that gets the job done. Think about it this way:

Leasing a commercial printer will only cost you a few hundred dollars, and will be a much better quality printer than one which will cost thousands of dollars.

What You Need To Know Before Buying A Copier

Posted by on 10:55 am in Uncategorized | Comments Off on What You Need To Know Before Buying A Copier

Although ubiquitous in companies around the world, photocopiers are not one and the same. They may fulfill more or less the same task, yet it is important to assess your needs and get proper information to find a model which will match your expectations and at the same time be simple enough to operate. Besides, when you intend to buy a photocopier from blackbox-solutions.co.uk, it’s also crucial to consider other options such as renting or leasing, to make sure you get the best service at the right price. Most modern photocopiers are nowadays preferably referred to as multi-function printers (MFPs), as they’re able to carry out a wide range of tasks. There are so many different levels of sophistication that taking certain key notions into account is vital to improve your business efficiency when you buy a photocopier.

Ink-jet or laser?

Choosing laser or ink-jet technology depends on your volume requirements. When the price per page is an important consideration, laser machines are at the high end of the price range but are still the optimal option as they are well-adapted to large volumes of copies. When low volume colour documents are required, ink-jet MFPs are the best choice, even if the ink they use is more expensive than toner for laser printers.

Print quality and speed

Speed is generally the most important feature for many businesses. Typically, mid-range machines will provide speeds of between 25 and 50 pages per minute for A4 paper. For companies which need mostly black and white copies, some models are faster in that mode than in colour. Print quality, or resolution, is also an important issue. Most machines offer resolution in the 600-1200 dpi range, which is perfect for internal use or simple flyers and user manuals. For high quality brochures and marketing material, you may need to buy a photocopier able to reach 2400 dpi.

Ergonomics

Manufacturers have taken steps to make their products as user-friendly as possible, and even offer on-site training sessions and hotlines. Network capabilities are essential in most modern offices, to integrate your MFP in the company’s infrastructure. Paper capacity must be carefully considered when you buy a photocopier. Needing to refill the paper tray too often may have an adverse effect on your workflow. High-capacity or multiple paper trays for different paper weights or types will ensure your printer is always ready. Likewise, a variety of finishing tools such as staplers or document folders.

Price

Assessing your needs to pinpoint your budget is of paramount importance, as prices range from £100 to more than £17,000. However, there’s more than just the capital cost to consider, as on the long run the price per page, depending on your printing volume, will represent most of your expenses.

According to your needs and the volume of documents you need to process, permanent purchase may not be the best option. Second hand machines or buying online may also be interesting ways to save money.

Buying a photocopier online

When you want to buy a photocopier, going online is always a good idea, to compare prices, understand the various models’ specificities and benefit from cheaper prices thanks to cheaper overheads. You’ll easily find retailers specializing in monochrome, multifunction or colour photocopiers for instance. You will also be able to negotiate good service rates.

Renting and leasing

Lease purchase or rental will allow you to spread the cost of your photocopier from blackbox-solutions.co.uk over several monthly fees, while guaranteeing your peace of mind as servicing and maintenance are often included in rental or lease contracts. That way, you’ll pay the best price for all your copying needs.

Get The Most From Your Multifunction Printer

Posted by on 10:29 am in Uncategorized | Comments Off on Get The Most From Your Multifunction Printer

Printers are the quiet saviours in any office. Often, it is easy to underestimate the impact that a printer has on the everyday capability of workers. Multifunction printers from blackbox-solutions.co.uk incorporate multiple products into one, combining a printer, photocopier and scanner along with faxing and emailing capabilities. They free up space which would otherwise be occupied by multiple machines, scanners and printers, and give you more room in the office for your workforce to do their job.

When properly utilised, multifunction printers can maximise efficiency, cut costs and boost overall productivity across all staff members. Not only this, but a properly utilised printer saves your business money and helps to increase profits. To find out how to make the most of your multifunction printer follow our 4 helpful tips below

Make the most of Scanning Features

You may be familiar with the basic tasks that your multifunction printer can perform, such as printing and copying, but many do not know the power behind scanning and could be missing out on a whole range of features that will increase your work productivity.

Learn the features that your multifunction printer has and use them wisely. Multifunction printers with automatic document feeders (ADF) can speed up the process of scanning or copying multiple pages of text by feeding each document into the scanner automatically. Instead of copying each page individually, staff can switch their attention to something else.

Scanning documents can also help to reduce the amount of paperwork and create a paper-free document storage system. Less clutter on desks not only increases space in the office, it also makes workspaces more pleasant to be in. Clear desks equal clearer minds, which means better work from your staff!

Tailor your settings to your business

It may seem obvious, but one of the best ways to make the most of your multifunction printer is to customise the settings so they are personalised to your business. Users can save money on ink by using the most basic settings on the printer, and can save paper by setting the printer to print automatically on each side of a sheet of paper. Whether you need extra security to protect your document data, differing printer speeds, eco-friendly printing settings or priority printing, many multifunction printers offer a host of extra settings to ensure that they perform exactly how you want them to. Whatever your business needs, by tailoring your printers settings to work exactly how you need them to, you will start to increase productivity instantly.

Embrace wireless printing

Wireless printing is an incredibly convenient feature for businesses, as it allows staff members to print from anywhere in an office. Staff members are not tied to their desks, and they no longer have to be in one location to be able to print documents from their machines. It also removes unsightly tangled cables from running across the entire office.

Some multifunction printers even offer mobile printing, which allows staff to print from any device while they are connected to the printer. Not only does this eliminate the need to transfer files from mobile to desktop before printing, and therefore saving time, it is also easy for staff members who work away from their desks or are often in meetings.

Show your printer some love by keeping it clean

Treat your printer like you would any other device you use during your work day. It requires the same amount of care and attention as your computer or your mobile phone when it comes to preserving its performance. To make your multifunction printer last, it is important that you maintain them to a high standard. This includes keeping the printers dust free, cleaning the scanner glass properly, and checking ink and toner levels.

Cleaning your printer is simple and beneficial in the long run – a lint free cleaning cloth and glass cleaner can make a huge different to your printers performance. Not only does this allow you to get your money’s worth from the machines and ensures continued high quality printing and scanning, it also helps to avoid unexpected breakdowns and errors with the machine.

Benefits Of Stand-Alone Printers

Posted by on 10:10 am in Uncategorized | Comments Off on Benefits Of Stand-Alone Printers

Even if you have only carried out a small amount of research, you will have discovered that the office printer market is full to bursting with different varieties and features. Knowing what to choose will require a good evaluation of your business printing needs, both now and projected for the future. Essentially you have stand-alone or multifunction printers, with inkjet or laser jet varieties with companies like blackbox-solutions.co.uk.

Stand-alone office printer choices

Here we are going to focus on the stand-alone printer, a stalwart of the print industry, but which may have been overlooked in recent years with the drive towards multifunction capability. Many businesses would greatly benefit from buying or leasing a stand-alone machine, and with all of the UKs leading manufacturers, such as HP, Kyocera and Canon, producing high quality and affordable office printers, now is the time to reevaluate and look at the benefits with blackbox-solutions.co.uk. The most important choice you have is between stand-alone or multifunction business printers. Once you have decided on this you can look further into inkjet verses laser printing, whether you would prefer a wireless printer and what features are essential, such as duplex printing or paper size compatibility.

Advantages of these printers for office use

This type of business printer should be the central powerhouse for all your office printing needs:

  • Costs work out far less per sheet, both for mono and colour printing.
  • Unrivalled black and white print speeds.
  • These office printers really excel in producing high resolution printing at optimum speeds. Many machines will have the option of printing at different resolutions, so simple black and white documents can be printed at the very fastest ppm. Want high resolution full colour printing? You can have that as well, with only a small drop in ppm.
  • Robust and durable. If you buy a stand-alone device you can rest assured that it will stand up to even the toughest office environment.
  • Printer can be used just for its purpose, printing. This means that employees won’t hold up important print jobs with scanning, fax etc.
  • Print in different sizes, alignments and paper thicknesses.
  • Set your office printer to complete binding and sorting tasks.
  • Large paper capacity (with multiple trays) saves on constant refilling and the hassle of paused print jobs.

So for the best quality printing and the speediest turnaround times, consider these printing devices to revolutionise your printing operations with blackbox-solutions.co.uk.